- [Exclusive Technology] Facon’s world-famous Tank Heater Pads. Heater Pads are Designed and Engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV, Camper, Trailer, Mobile home, Boat, Marine in winter. We own the Patent and Certificate for this Products. Genesis Lighting is the only manufacturer for this product.
- [Elbow Pipe Heater Pad] Simply turn "ON" the power switch when the outside temperature is near to freezing. Turn "OFF" the switch when the outside temperature remains above freezing, fluids have been vacated, or Summer is coming, or RV is not in use. If your RV don't have individual switch for Water Tank System, please order a switch in our store.
- [Application] The Pad Size 3’’ x 13’’ works efficiently on 3'' pipe or elbows. 3mm Foam Insulation Pad with self-adhesive make it easy installation, no extra facility required.
- [Easy Installation] 2-Wires Design without plug - Convenience for fixed place installation. Just wire this pad to 12Volt DC power supply and RV power switch. Red Wire=Positive (+); White Wire=Negative (-).
- [High Quality Warranty] Passed US Standard QAI Quality Certification. We take full Responsibility for our products and customer dissatisfaction. One Year Warranty GUARANTEE!
Properly sized and installed Facon Heater Pads provide consistent & efficient protection as the first signs of freezing winter weather approach
Specifications
Pad size (Inch) 3" x 13"
Foam Pad thickness 3.0MM
Volts 13.5 V DC
Power 7.5 W
Electric Current 0.55A
Lead Wire Lengh 18''
Heater pads are designed and engineered to protect RV holding tanks, pipes and steps from freezing.
Winter convenience of Today’s RV’er. Provides water for RV Trailer mobile home in Winter.
User’s Tips:
1.Do not Stretch the pad.
2.Apply pipe elbow heater pads to smooth and clean surfaces.
3.Clean the surface of the pipe with isopropyl alcohol and let dry.
4.Peel back the paper from the adhesive, and then press firmly and smoothly over the intended placement area.
5.The CW-E313 requires 13.5V DC to operate at maximum efficiency.
6.Please ensure the connection to the proper voltage and the proper”on/off” switch is used.
7.The connection must be fused with the correct amperage.
8.If two or more tank heater pads are to be used they must be connected parallel.
9. Pipe elbow heater pads are not thermostatically controlled. Pipe insulation may be used with model#GSHP-0313P.
10.Packing include 1pc 3"x13" Pipe Elbow heater pad.