120V AC silicone heating pad with 3M self-adhesive & built-in thermostat, auto shut-off at 190°F, for automotive metal surfaces, pre-heat engine fluid for cold weather startup.
Notice & Cautions
Extremely hot when working. FOR METAL SURFACES ONLY, keep away from all plastics. Only for automotive use, NOT personal body heating.
Directions
- Clean & dry target metal surface completely.
- Peel adhesive backing, attach pad firmly on metal.
- Seal all edges with included silicone sealer, allow it to fully cure before powering on.
- Plug into 120V AC outlet and preheat 10–15 minutes.
- Unplug power cord before starting vehicle.
Safety Information
- High-temperature heating surface, never attach to plastic, rubber or flammable materials.
- Do not cover powered pad with foam, insulation or combustible fabric.
- Stop using immediately if silicone coating or cord is cracked, torn or frayed.
- Keep away from gasoline, battery acid and flammable liquids while powered.
- For safety, unplug the pad after use or once preheating is complete.
Product Details
- Material: Silicone
- Special Feature: Automatic Shut Off, Thermostatically controlled, 3M Self Adhesive
- Pad Size: 4" x 5"
- Pad Thickness: 1.80MM
- Voltage: 120Volts AC
- Power: 50 Watts
- Electric Current: 0.45A
- Lead Wire Length: 72" (183cm)
- Plug Type: Ungrounded 2-Prong Power Cord
- Thermostat Cut-off Temp: 190°F (±10°F)
- Package Includes: 1 x Silicone Heater Pad, 1 x Weatherproof silicone sealer
- Compatible Surfaces: Automotive metal oil pan, fuel tank, reservoir, transmission pan
- Not Suitable: Plastic surfaces, personal body heating

USD